|Tank Material||Stainless Steel, Copper|
Over the years, we have gained enormous credibility across different domestic and international markets in providing qualitative Hot Water Circulating Systems
those are used for hot water supply at different places. Under the direction of our qualified professionals, the offered systems are designed and manufactured by making use of the excellent grade components and cutting-edge technology in accordance with the set industry standards. To ensure the quality of the provided water circulating system, these systems are duly tested on various quality parameters.
- Energy efficient
- Defect free
- Leakage proof
Several methods have been employed to reduce the energy waste associated with hot water pump circulating systems:
- Timers are sometimes placed on the circulating pump so the system shuts the hot water pump off during hours that one normally uses hot water such as from midnight to 6:00 a. m.
- Another type is where the circulating pump is controlled by a temperature sensing circuit that shuts the hot water pump off once the water temperature reaches a pre-set temperature such as 50 degrees and then starts the pump back up when the water temperature in the pipe drops below a second set point such as 40degrees.
- This type of system does quite a lot to reduce the energy losses because the circulation pump turns on only when the temperature is not achieved at the point where the sensor is placed. Although lower set temperature point is still pretty high enough to cause large heat losses from the system, this is the best available in this series.